Making a Case for SIP Insulated Modular Home

Modular Home
SIP Insulated Modular Home

The Structural Insulated Panel makes modular home exteriors seem rigid in comparison to traditional home building methods. In the SIP method, home builders attach Oriented Strand Boards with a sturdy foam material. Amusingly, manufacturers say such a modular home has two-layer “sandwiched” walls.

First Time Distance between Factory and Site

In the year 2000, manufacturers conceived the idea from within factories to lessen patchwork and cut down on HVAC costs. It was difficult for manufacturers at the time to cover mile-long factory-to-site distances, even with trailers. However, it is said that 300 miles was the distance covered by the first ever modular home raised on SIP.

SIP Construction in Modern Times

Did you know the use of Structural Insulated Panel in a factory ecosystem eliminates the need for landfill dumping? Modern home builders use the leftover foam for other foam-based products. This lessens their impact on the environment. Also, the OSB seal makes the insulation airtight, and greatly reduces leftover material.

The SIP Ways to Being Self-Sufficient

The energy spent on building a modular home leaves a diminished carbon footprint. Builders produce the foam they employ in SIP insulation by means of air combustion, with barely 2 percent petroleum. Finally, the blowing agent builders use in panels is immune to toxic gases such as chlorofluorocarbon.

Finding the Manufacturer of Choice

Homeowners are eager to know about modular home prices, even as more means of construction gradually develop. There are plenty of ways to access prototypes as many home builders churn out user-specific modular homes. Still, finding the manufacturer of choice eventually depends on who uses which methods in the construction phase.

Building a modular home with SIP is no quick fix, since more planning is involved in the former method. Yet, despite SIP construction methods, that is gradually evolving among manufacturers and homeowners settled in American suburbs. Would homeowners and manufacturers cooperate with each other to enable faster construction? Or, would the ones that are insulation-heavy create a price war as opposed to traditional a modular home? In 2008, a SIP maker raked in huge profits after regional contractors began the system in Massachusetts. However, that was quite a while ago.